1、The total pressure drop in hung-up regime is approximately equal to that in the standpipe.
并且證明懸料區的總壓降可以近似等于立管的壓降。

2、Read the pressure drop across the valve with a Watts Series PG meter.
利用美國瓦茨系列PG儀器讀出通過閥門的壓降。

3、There are larger pressure drop in multiphase flow.
當水平段出現多相流時會有顯著壓降。

4、Study on Pressure Drop in Tee mixer
T型管混合器壓降研究

5、The pressure drop increases as the Reynolds number, the fin width and the fin height increase.
壓力下降的情況會隨著雷諾數升高而升高，也會隨著散熱片的高度和寬度提高而提高。

6、Should be larger port area to ensure less friction and pressure drop across the valve.
較大開口區域應保證通過閥門較小的摩擦力和壓力降。

7、In this range, the pressure drop increases in proportion to the specific gravity of the mixture.
在這個范圍內壓力差的增加與混合物的比重成比例。

8、PRESSURE DROP CURVES ANALYSIS OF WATER INJECTION WELLS
注水井試井曲線分析

pressure drop翻譯