1、HYDRAULIC SCREWDOWN CONTROL SYSTEM OF MANDREL PIPE MILL
連軋管機液壓壓下控制系統

2、After the mandrel is melted, a thin layer of alloy remains on the propellant surface.
此心軸溶化之后，在推進劑表面上留有一薄層的合金。

3、DEVELOPMENT OF PROCESS TECHNOLOGY OF RETAINED MANDREL MPM
限動芯棒連軋管機工藝技術的發展

4、The plunger consists of a solid spiral mandrel, tapered mandrel nose, and premium high-alloy dart.
該柱塞包括一個實心螺旋軸、錐形芯軸的機頭和優質高合金活門。

5、The centers must be aligned and the mandrel must be free of burrs.
這些中心點必須排列成一行，并且保證心軸上沒有毛刺的現象出現。

6、The formulas introduced for design of the parabolic mandrel and pass are worth referring to.
引用的拋物線芯棒及孔型設計公式可供參考。

7、The results indicate that the influence of the metal mandrel is constant.
結果表明，金屬芯棒的影響是恒定的。

8、The mandrel must be mounted between centers and a drive plate and lathe dog must be used.
必須將心軸錨定在中心點和驅動板之間的位置，并且必須使用車床軋頭。

9、The structural design of molding mandrel of pyrophillite was improved.
對葉塊成型芯軸的結構進行了設計改進。

10、Tissue paper in cards and membership cards in the making of why mandrel deformation?
薄紙?jiān)谥瓶ê蜁?huì)員卡制作中為什么會發生漲縮變形問題？

mandrel翻譯